It is possible that some individuals with gait impairment may be prevented recovering locomotive function. ![]() These techniques are beneficial for effortlessly supporting patients’ locomotive functions, but the users of such devices must necessarily remain dependent on them. Acrylic Cure & Seal can be applied with a roller, garden sprayer or a brush.Many techniques that compensate for locomotion problems in daily life using externally controlled stimulation have recently been reported. TIP: water curing can be eliminated by applying QUIKRETE Acrylic Concrete Cure & Seal immediately after finishing the concrete. Use a trowel to smooth any rough edges before the concrete becomes “thumbprint” hard.īegin curing the concrete immediately after the sheen has left the surface of the concrete.įreshly placed concrete should be water cured for a minimum of 3 to 5 days with a fine water mist. Rotate the form a quarter of a turn to vary the pattern for a random look. Smooth the surface and immediately remove the form (there is no need to wait for the concrete to set). ![]() Using a margin trowel, press the concrete mix into the form working from the corners to consolidate the concrete and eliminate any voids. Place the Walkmaker form on the ground and begin to fill the cavities with concrete. TIP: each 2’x2’ Walkmaker form is designed for use with one 80-pound bag of QUIKRETE concrete Mix. ![]() If using liquid cement color, add to the mixing water. When working with cement-based products, always wear eye protection and waterproof gloves.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |